Platform Load Cell 1040

The main application for the platform load cell 1040 is in packaging and filling machines. It is the three beam design which gives the 1040 a high natural frequency and low deflection making it resistant to sudden dynamic loads. For example if you drop a large potato from a height of 20 cm into the stainless steel hopper of a linear or multi-head weigher, a peak load of up to 10,000g can occur and this may happen millions of times per year. The same applications can be found in the bagging and filling applications in the medical and pharmaceutical process industries. The Model 1040 load cell is manufactured using an optimised complex machining process. This ensures that there will be no measurement error when the load is placed off centre, eg in a corner of a platform. A platform scale can easily be constructed using this load cell. You have to mount the load cell between two steel or aluminum plates up to 400 mm square, securing the bottom plate to the threaded holes in the underside of the load cell (cable entry end) and the top plate to the threaded holes on the upper face (opposite cable entry end). The load cell then has to connected to a suitable display or readout. This platform load cell can be supplied with an optional ATEX II 2G EEx ia IIC T4 certificate for use in hazardous gas areas - Zone 1 & 2. For additional sealing, the model 1040 can be provided with optional Sylgard protection